Does anyone know why it is not working and what needs to be done to get it back in operation?
I have updated the Tool Page with some data I found on the Way Back Machine.
I’ll have a look at the installation when I am next in the space.
I heard that the power supply is missing. This is from the technical PDF: Line Wobbler uses a 5 volts, 8 ampere power supply. This makes its maximum power consumption 40 Watts. The connector facing the box is an XT60 connector, and the cord connecting to mains is a standard C14 inlet.
1 Like
I think there should be a suitable PSU in the electronics area. I can help some time 
It’s all on me. I have all the parts at home. My bad. Will poke and prod this beast until its done. My apologies.
Keep Smiling
D
1 Like
@kyle @asander1
I believe there was movement to port the game for outdoor use. There’s tape on the under side of the arch 1 shutter but it didn’t get finished. Line Wobbler should work as normal once reconnected, but the wiring needs redoing as parts of it were hacked and taped together and hanging off the wooden drawers where it sits which made it precarious because that’s where people sit on the sofas.
I was pulling together the parts which facilitates an inline plug batween the drawers and wall so that if needed the drawers can be moved. I had planned on drawing the electric from the roof of the toilet and not from beneath the sofas. I have the cables and power supply at home. I will endeavour to get this sorted by monday at latest. I was going to do it today, but once again Im not well enough to come in.
Keep Smiling
D