Another spray paint question

[CriticalTolerance (EdwardBilson)]

Hi all - sorry, I know this comes up frequently but with recent changes to layout I wasn’t sure what the current position was. For small stuff, are we still ok to spray paint with rattle cans in the booth at the back of screen printing provided we have:

-FFP3 masks
-Local extraction on 100%
-Suitable measures to prevent paint getting on everything.

Alternatively, would the welding bay be more suitable with the same mitigations in place.

[asander1 (Andy Sanderson)]

Hi!

Read this post for spraying guidelines:

Spraying Paint

Hi all, this comes up often… Here is the current answer: To sum up: We don’t have a proper spray booth But you can spray small stuff in the wash down booth in messy room with: FFP3 Mask Extraction open in the booth (in pic its closed, open it!) [IMG_6608] Extraction fan on 100% (by metal area) [IMG_6606] [IMG_6605] Don’t get paint all over the place You can paint outside with FFP3 mask away from the doors and don’t block vehicle access or get paint on any cars / storage …

Keep it outside if at all possible, and definitely NOT in the metal area.

Let us know any questions!
Cheers,
Andy

[CriticalTolerance (EdwardBilson)]

Hi Andy - cheers, I will also note any updates on that post resulting from the last year’s worth of work in the area

[asander1 (Andy Sanderson)]

Thanks!