We had a few old prints of hummingbirds and a near infinite supply of ash wood, so I made some frames. Here they are:
I don’t have any pictures of making the miters, but, I started with a couple of spare ash pieces, thicknessed them, cut into 16 equal pieces on the table saw, then mitered them on the table saw. I should have used a backing piece to prevent tear out. The recesses for the glass/print were done on the spindle moulder. After the glue-up, I used Joe’s spline jig to make recesses for splines:
Splines in:
Splines cut away and sanded down:
Affixing the matt board and glass:
