How To: Reboot the door control if Arch 2 won't open

If the door fob reader for Arch 2 just says “connecting…” it needs to be rebooted. Please follow the following steps:

  1. Gain access to Arch 2
  2. Turn off the door control power via the switch (circle 1)
  3. At the moment the battery is disconnected but if it is back on please do the following steps:
    1. Disconnect the backup battery (circle 2) within the enclosure. The black plastic key should be on a red wire close to the leftmost box.
    2. Reconnect the battery and close the box.
  4. Turn the door control power back on after 10sec

1 Like