Ultimaker is down

Tags: #<Tag:0x00007fa4964937d8>
#1

The ultimakers head starts brutally shaking when it starts the print. Out of order sign placed on the machine.

2 Likes
#2

Thanks for the heads up! We’ll have a look at it @3dtechs

2 Likes
#3

I’m planning on going in tomorrow so I’ll I’ve a look to see what’s up.

3 Likes
#4

Check out the other one too it refuses to print​:rofl::rofl::sob::sob: preheat works, when I tried printig it sat the head to the front left corner and did nothing. I have a feeling it was my setup in the g code ( I just modified the infill on both heads) my file is on the card.

#5

Weird, they were both working fine yesterday.

#6

I have a feeling I did the wrong setup on the top one. The ultimaker scared the shit out of me when started shaking.

#7

Does it seem anything like the issue described here by any chance?

#8

No it appeared after printing 3mm wide of base support around the print.

#9

Ok. I’ll have a go tomorrow and see what it looks like.

1 Like
#10

Thank you!

#11

So I’m not really sure what happened, but I guess the noise was the z axis stepper skipping because the z axis was way out. After I calibrated the z axis I printed that ghost and it came out fine, so I’m thinking that something went wrong when you sliced your model. I’d suggest checking your settings, slicing it again, and having another go at printing it.

Gonna take the sign off anyway since my test print came out ok.

2 Likes
#12

Thank you! I give it a go when the printer will be empty.

1 Like