# Resin Printing Resurrection

**URL:** <https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016>\
**Category:** Discussion\
**Tags:** 3dprinting\
**Created:** [22 July 2026 09:21 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016 "2026-07-22T09:21:49Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Glass](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/glass/32/29116_2.png) [@Glass](https://discourse.southlondonmakerspace.org/u/Glass)\
**Post date:** [22 July 2026 09:21 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/1 "2026-07-22T09:21:49Z")

</div>

Hey hey [@3dtechs](https://discourse.southlondonmakerspace.org/groups/3dtechs) , I’ll be in the space using one of the X1 Carbons tonight. When I was last in there were talks of trying to get the resin printer back in working order. If anyone is around tonight, I’d be happy to take a look at it. I have lots of experience using and fixing most MSLA printers. I think I saw somewhere that it’s a Proton? Regardless, happy to have a chat and talk about making resin printing available at the space again.

Best,  
Nick

---

<div class="post-metadata">

**Author:** ![asander1](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/asander1/32/14251_2.png) [@asander1](https://discourse.southlondonmakerspace.org/u/asander1)\
**Post date:** [22 July 2026 11:05 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/2 "2026-07-22T11:05:57Z")

</div>

@JanT was also interested in the resin printer coming back!

---

<div class="post-metadata">

**Author:** ![FunkyGroover](https://discourse.southlondonmakerspace.org/letter_avatar/funkygroover/32/5_5575768a8748004e209b776fc1b2916d.png) [@FunkyGroover](https://discourse.southlondonmakerspace.org/u/FunkyGroover)\
**Post date:** [22 July 2026 12:02 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/3 "2026-07-22T12:02:08Z")

</div>

My understanding is that the issue isn’t the printer, it’s safety - the printer works fine but there isnt an adequate setup to deal with the resin.

Lia and I were trying to figure out what would be necessary a few months ago. We started probing a design for a fume hood with downdraft extraction + spill tray, but the project fell by the wayside because I was too busy.

---

<div class="post-metadata">

**Author:** ![mia](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/mia/32/29527_2.png) [@mia](https://discourse.southlondonmakerspace.org/u/mia)\
**Post date:** [22 July 2026 14:07 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/4 "2026-07-22T14:07:24Z")

</div>

[@3dtechs](https://discourse.southlondonmakerspace.org/groups/3dtechs) can give more detail about the plan, but I believe it’s to have an enclosure around the printer similar to the new CNC machine. I’m helping with the electronics. The idea is to design 2 custom PCBs that can be used both for tool control and also fume hood control (e.g. door sensor and fan relay).

This design is currently in the early stages of being costed out but I hope it will be useful for multiple areas that need new tool controls.

---

<div class="post-metadata">

**Author:** ![asander1](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/asander1/32/14251_2.png) [@asander1](https://discourse.southlondonmakerspace.org/u/asander1)\
**Post date:** [22 July 2026 17:14 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/5 "2026-07-22T17:14:55Z")

</div>

Seems like that is already a thing… I know we are a Makerspace, but it does take a lot of time and effort to custom build something…

 ![image](https://slms-discourse.s3.dualstack.eu-west-2.amazonaws.com/original/3X/1/8/189da129d4f6ed9d62c5b71860d7e3b058caecdf.jpeg)

> **[Creality Official Resin 3D Printer Enclosure with Fan Interface, 1000x500x1000mm...](https://www.amazon.co.uk/Creality-Enclosure-1000x500x1000mm-Temperature-Compatible/dp/B0FY1R2L4X)**
>
> Creality Official Resin 3D Printer Enclosure with Fan Interface, 1000x500x1000mm Extra Large Space 3D Print Cover, Constant Temperature Dustproof Isolate Noise, Compatible with LCD Resin UV 3D Printer

So, can we just buy an enclosure?

---

<div class="post-metadata">

**Author:** ![Sean](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/sean/32/28940_2.png) [@Sean](https://discourse.southlondonmakerspace.org/u/Sean)\
**Post date:** [22 July 2026 17:25 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/6 "2026-07-22T17:25:10Z")

</div>

For context: this is a bit cheaper than the CNC enclosure ended up being (I think it was about £175 all in) - seems like a good option

---

<div class="post-metadata">

**Author:** ![maji](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/maji/32/29853_2.png) [@maji](https://discourse.southlondonmakerspace.org/u/maji)\
**Post date:** [22 July 2026 18:46 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/7 "2026-07-22T18:46:53Z")

</div>

Yes it’s about safety and 3dtechs are barely keeping up fixing the bashings the printers take. E.g. 2 weeks ago Johanness had a Z axis bearing knocked out 😱

Fume hoods/cabinets, DIY and COTS, are being considered.

---

<div class="post-metadata">

**Author:** ![asander1](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/asander1/32/14251_2.png) [@asander1](https://discourse.southlondonmakerspace.org/u/asander1)\
**Post date:** [22 July 2026 19:07 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/8 "2026-07-22T19:07:31Z")

</div>

Yea im sure! If techs are pressed for time it definitely makes way more sense to buy something

---

<div class="post-metadata">

**Author:** ![FunkyGroover](https://discourse.southlondonmakerspace.org/letter_avatar/funkygroover/32/5_5575768a8748004e209b776fc1b2916d.png) [@FunkyGroover](https://discourse.southlondonmakerspace.org/u/FunkyGroover)\
**Post date:** [23 July 2026 07:42 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/9 "2026-07-23T07:42:13Z")

</div>

I wouldnt trust that enclosure, it looks way too small and it’s flimsy canvas with zips.

In my opinion we need a pretty robust solution. I would expect a proper fume hood, dead switches when the door is open, non-porous counter surface fully enclosed in the negative pressure zone, etc.

Resin is a risk to people other than the user, and people are in that room for hours observing filament prints and working on textiles. I don’t think we should work with it in the space unless we can guarantee essentially zero risk of second-hand exposure.

---

<div class="post-metadata">

**Author:** ![Geraetefreund](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/geraetefreund/32/20119_2.png) [@Geraetefreund](https://discourse.southlondonmakerspace.org/u/Geraetefreund)\
**Post date:** [23 July 2026 08:01 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/10 "2026-07-23T08:01:09Z")

</div>

An enclosure is great to have, but what about the contaminated IPA waste?

---

<div class="post-metadata">

**Author:** ![Glass](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/glass/32/29116_2.png) [@Glass](https://discourse.southlondonmakerspace.org/u/Glass)\
**Post date:** [23 July 2026 08:51 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/11 "2026-07-23T08:51:29Z")

</div>

@FunkyGroover I agree that in a perfect scenario that what you’re suggesting would be ideal. But its a little overkill. Most resin 3d printers contain fumes within the print chamber and have some form of internal venting. Even a canvas enclosure, granted it’s well made, should do the trick of capturing any escaping fumes. I worked in a space with 4 resin printers running simultaneously and we got away with some carbon air purifiers and good PPE. As long as we have respirators and gloves in the space for use (which will be a different challenge to figure out) then we should be ok. Again, granted that people in the space aren’t opening and closing the enclosure all the time, it should be good to run while other people are working on textiles and filament prints. We could look at getting something like [this](https://www.amazon.co.uk/Glowforge-Aura-Filter-Activated-Filters/dp/B0CBQQKR1L/ref=asc_df_B0CBQQKR1L?mcid=366b4f197b873a61af81ba4f9cbb9ed3&tag=googshopuk-21&linkCode=df0&hvadid=781436569654&hvpos=&hvnetw=g&hvrand=3955357624248256547&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9045891&hvtargid=pla-2380697131152&psc=1&hvocijid=3955357624248256547-B0CBQQKR1L-&hvexpln=0&gad_source=1) to hook up to it. Or I would suggest getting [this](https://www.amazon.co.uk/Purifier-Commercial-Industrial-Elimination-X-2830U/dp/B0DFH24V9V?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A10KY99RSF3TX4&utm_source=chatgpt.com&th=1) for the general area.

The real chances for contamination and fumes are going to come when changing the resin, cleaning the tank, or any activity that has the uncured resin exposed to open air for long periods of time. I agree we need a solution to that, and a workflow around how and where it’s going to happen. @Geraetefreund you bring up an excellent point about IPA waste. We would need a dedicated receptacle for that. I would suggest we try to cure the waste for a minimum of 30 mins with 405nm UV. We could make a resin “kill box” if you will. Essentially just a box we can place the wash tank full of contaminated fluid in, surrounded by uv light, that we can close the door to and cure the hell out of the waste fluid. Once blasted with UV, we’d need a dedicated bucket and strainer to separate the cured debris and waste fluid. The waste fluid can then be reused for washing.

All of that is going to require a dedicated work area. From what I saw last night in the 3d printing room, it looks like a venting solution was being made at some point, but the vent pipes are not fully connected yet. That little table would be ideal for housing the resin printer and cure/wash station, but not good for actually working with resin. @FunkyGroover I totally agree we need some [non-porous mats](https://www.amazon.co.uk/VEGCOO-Silicone-Silcone-Jewelry-Casting/dp/B08XVM6JMY/ref=sr_1_10?crid=2GWT10AN9Q22R&dib=eyJ2IjoiMSJ9.9TtNKg8sDtfCquuv7_C6guFSUnYQw46IpEBoz6aCm61fkgYp-jQoxf_s6grxEByJr_SJ9WTQscdWTPumhMipjaar8U6Yp4gHTmN7YoQTITDKYBLxvgmS1xIlspg0M_5UDFr4EvqV6sIjxWlyBT96zgfN0EVB7SpFGHGmH0lw24D69IEy4zrrjMiLmxws0NuFI5n1ZmLptTufWiP1XHMKvdPIP7yQAFZZ61DoGklOZ0-kPZWnnbbOOq2o3Aj6tnT9atm5GTYfb3GG5d0GN2LrUi2T8zJzHNSVWKzL6xbekOc.Cg0iVZBlpUhn-ffpHEIG2LyqIvWUdQwXeixokk3tsOc&dib_tag=se&keywords=mess%2Bmat&qid=1784796478&s=kitchen&sprefix=mess%2Bma%2Ckitchen%2C191&sr=1-10&th=1) for the work surface, and it would be ideal if we [could just wall off that part of the room completely](https://www.wickes.co.uk/Trimaco-E-Z-Up-Dust-Containment-Pole-Kit---Pack-of-4/p/299914?utm_source=chatgpt.com) but I don’t think that’s possible given the size and spot.

All this to say, I would love to have a sit down meeting or online call to talk through this all with you lovely people. I think it’s possible, it’s just going to take a village and some major thinking. Looking forward to it!

---

<div class="post-metadata">

**Author:** ![Dorine](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/dorine/32/18337_2.png) [@Dorine](https://discourse.southlondonmakerspace.org/u/Dorine)\
**Post date:** [23 July 2026 09:10 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/12 "2026-07-23T09:10:27Z")

</div>

I can confirm it works and that its robust enough using a canvas enclosure as long as people using it are responsible. We have a resin printer at our Kent makerspace, we use such a settup to keep both UV out and fumes venting out.

---

<div class="post-metadata">

**Author:** ![unknowndomain](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/unknowndomain/32/30593_2.png) [@unknowndomain](https://discourse.southlondonmakerspace.org/u/unknowndomain)\
**Post date:** [5 August 2026 21:15 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/13 "2026-08-05T21:15:15Z")

</div>

The reason canvas enclosures work is because they create a negative pressure that means the leaks are the clean air source into the chamber rather than the way fume escapes, and all the air is pulled through to a series of filters.

The question is whether you trust recirculating filters to handle enough of the fume to keep you below the workplace exposure limits (WELs) for EH40 listed compounds and if there are non-listed things to be worried about (like UFPs in 3D printers which are hotly debated and not specifically listed).

---

<div class="post-metadata">

**Author:** ![joemyerscough](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/joemyerscough/32/22795_2.png) [@joemyerscough](https://discourse.southlondonmakerspace.org/u/joemyerscough)\
**Post date:** [3 September 2026 10:02 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/14 "2026-09-03T10:02:31Z")

</div>

Just wanted to nudge this as I’d love to see the resin printer brought back to life. Not an expert in ventilation and waste disposal but happy to help in whatever way I can!

---

<div class="post-metadata">

**Author:** ![joemyerscough](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/joemyerscough/32/22795_2.png) [@joemyerscough](https://discourse.southlondonmakerspace.org/u/joemyerscough)\
**Post date:** [2 October 2026 15:58 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/15 "2026-10-02T15:58:23Z")

</div>

Hi [@3dtechs](https://discourse.southlondonmakerspace.org/groups/3dtechs) - I know you’re all super busy but wanted to nudge on this again. Willing to help in any way I can if there’s a way to push forward project to find a safe way to bring the resin printer back to life. Keen to know what you think the next steps are.

---

<div class="post-metadata">

**Author:** ![asander1](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/asander1/32/14251_2.png) [@asander1](https://discourse.southlondonmakerspace.org/u/asander1)\
**Post date:** [7 October 2026 16:17 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/16 "2026-10-07T16:17:55Z")

</div>

Again, why can’t we buy the enclosure that the vendor makes??

> [@Resin Printing Resurrection](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/5):
>
> Seems like that is already a thing… I know we are a Makerspace, but it does take a lot of time and effort to custom build something… So, can we just buy an enclosure?

---

<div class="post-metadata">

**Author:** ![danielbenton](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/danielbenton/32/21279_2.png) [@danielbenton](https://discourse.southlondonmakerspace.org/u/danielbenton)\
**Post date:** [7 October 2026 16:25 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/17 "2026-10-07T16:25:32Z")

</div>

Because [@3dtechs](https://discourse.southlondonmakerspace.org/groups/3dtechs) don’t respond or have gone missing, they’d need to authorise it with directors, and… well…

---

<div class="post-metadata">

**Author:** ![davidN](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/davidn/32/16381_2.png) [@davidN](https://discourse.southlondonmakerspace.org/u/davidN)\
**Post date:** [7 October 2026 16:36 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/18 "2026-10-07T16:36:03Z")

</div>

I was working on a PCB / 3d printed ball valve for the current extractor that would work with a tool control node. I made what I was hoping was the final revision but am lacking a few components. Happy to push through on it if it will be used.

---

<div class="post-metadata">

**Author:** ![Lia](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/lia/32/29894_2.png) [@Lia](https://discourse.southlondonmakerspace.org/u/Lia)\
**Post date:** [8 October 2026 16:34 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/19 "2026-10-08T16:34:32Z")

</div>

Hiiiiiiiii,

We are working on this.

There will a detailed update soon.

[@3dtechs](https://discourse.southlondonmakerspace.org/groups/3dtechs)

---

<div class="post-metadata">

**Author:** ![Lia](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/lia/32/29894_2.png) [@Lia](https://discourse.southlondonmakerspace.org/u/Lia)\
**Post date:** [8 October 2026 16:36 UTC](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016/20 "2026-10-08T16:36:06Z")

</div>

> [@danielbenton](#):
>
> Because [@3dtechs](https://discourse.southlondonmakerspace.org/groups/3dtechs) don’t respond or have gone missing,

We were napping. 💤 and yes getting things approved by the directors is something that might slow things down. 🤷‍♀️

[Next page](https://discourse.southlondonmakerspace.org/t/resin-printing-resurrection/51016.md?page=2)