# QR Codes on Tools / Around the Space

**URL:** <https://discourse.southlondonmakerspace.org/t/qr-codes-on-tools-around-the-space/20985>\
**Category:** Discussion\
**Created:** [1 April 2022 12:22 UTC](https://discourse.southlondonmakerspace.org/t/qr-codes-on-tools-around-the-space/20985 "2022-04-01T12:22:43Z")\
**Posts on this page:** 1\
**Showing post:** 39

<div class="post-metadata">

**Author:** ![mbg](https://discourse.southlondonmakerspace.org/letter_avatar/mbg/32/5_5575768a8748004e209b776fc1b2916d.png) [@mbg](https://discourse.southlondonmakerspace.org/u/mbg)\
**Post date:** [11 January 2024 10:46 UTC](https://discourse.southlondonmakerspace.org/t/qr-codes-on-tools-around-the-space/20985/39 "2024-01-11T10:46:23Z")

</div>

Quick note on the URL: there’s an easy way to keep those stable. Looking at the one for tool sharpening for example:

[https://discourse.southlondonmakerspace.org/t/wood-tool-sharpening-chisels-and-plane-blades/31592](https://discourse.southlondonmakerspace.org/t/wood-tool-sharpening-chisels-and-plane-blades/31592)

By default notice how the tool page name is in the URL to make it human readable but can change, then it’s followed by the page ID, which does not change. You can actually get rid of the name and make that link non-human readable, but much more stable:

[https://discourse.southlondonmakerspace.org/t/31592](https://discourse.southlondonmakerspace.org/t/31592)

If the page name gets changed, that bottom link should keep working.

---

_[View the full topic](https://discourse.southlondonmakerspace.org/t/qr-codes-on-tools-around-the-space/20985)._