# Hello! I'm Interested in a membership, if anyone would be able to advice about the facilities :)

**URL:** <https://discourse.southlondonmakerspace.org/t/hello-im-interested-in-a-membership-if-anyone-would-be-able-to-advice-about-the-facilities/27644>\
**Category:** Discussion\
**Tags:** laser\
**Created:** [22 May 2023 12:33 UTC](https://discourse.southlondonmakerspace.org/t/hello-im-interested-in-a-membership-if-anyone-would-be-able-to-advice-about-the-facilities/27644 "2023-05-22T12:33:51Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Geraetefreund](https://discourse.southlondonmakerspace.org/user_avatar/discourse.southlondonmakerspace.org/geraetefreund/32/20119_2.png) [@Geraetefreund](https://discourse.southlondonmakerspace.org/u/Geraetefreund)\
**Post date:** [22 May 2023 14:06 UTC](https://discourse.southlondonmakerspace.org/t/hello-im-interested-in-a-membership-if-anyone-would-be-able-to-advice-about-the-facilities/27644/3 "2023-05-22T14:06:46Z")

</div>

Hi Francesca,

Welcome to our community. Our [Lasercutter](https://discourse.southlondonmakerspace.org/t/laser-cutter-trotec-speedy-300/14) will be very useful for your project. It makes really clean cuts on acrylic and they are highly accurate, so for inlays and such this should work very well. I’m not an expert though, but from your sketch, it looks like you could achieve that at SLMS.

I just randomly picked these from posts here on Discourse:

> [@Acrylic jewellery](https://discourse.southlondonmakerspace.org/t/acrylic-jewellery/22666):
>
> Yesterday when I was at the space I spent some time experimenting with the lasercutter to make some acrylic jewellery for some upcoming birthdays. It’s not perfect (there are some glue marks you can see and it took longer then it should have), but I’m pretty happy with the result. The one on the left is a broach, and the one on the right is a hair clip.

> [@Laser Cut Ply for Acrylic Inlay - LED Wedding Sign](https://discourse.southlondonmakerspace.org/t/laser-cut-ply-for-acrylic-inlay-led-wedding-sign/25474):
>
> Hi all, I am wanting to create some signs for my wedding for the bar and a few other areas and want to backlight it. I either want to have white/clear-frosted acrylic so I can have the ability to use colour-changing LED strips or coloured acrylic so I can use a standard white LED. I will want this to be inlayed into 5-10mm thick ply and the sign will be probably 500x400mm (enough to fit in the Trotec), which I might stain, paint or even engrave some design. I would box the signs up so the dept…

Here’s a [list](https://discourse.southlondonmakerspace.org/c/tools) of all our tools.

I would highly recommend to come to an [Open Evening](https://discourse.southlondonmakerspace.org/t/open-evening-may-31st-7pm-9pm/27402) and check out the space for yourself. The next one will be on [Wednesday, May 31st from 7pm-9pm](https://discourse.southlondonmakerspace.org/t/open-evening-may-31st-7pm-9pm/27402). No reservation needed, just come.

See you at the Makerspace,  
Mark

---

_[View the full topic](https://discourse.southlondonmakerspace.org/t/hello-im-interested-in-a-membership-if-anyone-would-be-able-to-advice-about-the-facilities/27644)._