Clear out - some small items to give away if anyone wants them

(Neil Thomson) #1

On the konmari train and had a clear out, some items that I’ve been hoarding that seemed a shame to recycle / dispose but wouldn’t go to a charity shop, listed below. If you want them, say so and I can leave in the space for you with strong promise you’ll pick them up promptly.

Counter - this is a decent size, about 120mm wide not including key shaft etc. Counts in up in 5s though.

Does not fit the makerspace printer, 1.75mm white, of unknown age but still sealed.

Metal Enclosure with some holes cut in, about 150mm x 70 x 50 at a wild guess (didn’t measure any stuff when I took the pictures and they’re now not next to me sorry)

Modelling clay, also good for mould makers?

O rings imperial

A couple springs - maybe could be subsumed into metalworking
Jubilee clips
Hard grey rubber ends
Metal Gears - surface rust and they have a little threaded grub screw hole

PCB spacers, loads of them, approx 50mm long M3 or 4

Washers - M3, 4 & 5?

Stainless steel zip ties.

Assorted M4 bolts and some M3 grub screws

If ppl don’t want them happy to donate to the space for general use?

(Afshin Dehkordi) #2

Hi modelling clay and cable ties if still available

(Pete Hellyer) #3

i’d grab the PLA if it is going still?

(Mike Kelly) #4

I’m always interested in PCB spacers, bolts and washers :slightly_smiling_face:

(Tariq Maruf) #5

Hi Pcb spacers please. if any left

(Neil Thomson) #6

To everyone who’s claimed stuff, it’s yours I will leave it in the space Thursday evening.

I have some more bits!

double socket and box

Single sided copper pcb - @electrotechs want these for stock?

Neon fabric coated twin core mains cable

USB midi controller

AC-AC toroid transformer (see label in pic)


(Afshin Dehkordi) #7

the mains cables please!

(unknowndomain) #8

Is the USB midi keyboard available?

(Ed Yeboah) #9

Definitely up for some blots, spacers and washers! Split perhaps?

(Esther Gladstone) #10

If @afshind is willing to share some mains cable I would love some too!

(Jonty Bottomley) #11

I’d put in that the space would have all bolts, springs, o-rings, etc etc. given we have near zero stock. For members to pick and choose as and when they need bits.

(Afshin Dehkordi) #12

Sure. I was interested in the black and either blue or yellow…not sure if they are all same length

(Esther Gladstone) #13

Thanks Af! Blue and green would be my preference so it looks like that would work with you?

(Afshin Dehkordi) #14


(Neil Thomson) #15

Claimed things on the table

@unknowndomain I left the keyboard at work but will do it off v soon!

(unknowndomain) #16

Are you going on Saturday to Maker Festival?

(Neil Thomson) #17

Hopefully, if I am will bring it then?

(unknowndomain) #18

Sounds great!

(Tom Newsom) #19

Space should get automatic first dibs on connsumable parts

(unknowndomain) #20

Did you have time to go to the space yet?